Regulatory information
Disposal and Recycling
This symbol indicates that your product must be disposed of properly according to local laws and regulations. When your product reaches its end of life, contact Yanzi or your local authorities to learn about recycling options.
General Product Information
The information below relates to the following products
| Product name | Model no |
|---|---|
| Yanzi IoT Gateway | DR2-8830 |
| Yanzi IoT Gateway Plus | DR2-8910 |
| Yanzi IoT Gateway 2 | DR3-314x |
| Yanzi Access Point 3 | AP3-1001 |
| Yanzi Climate | SWTH1-1230 |
| Yanzi Motion | MDW1-0201 |
| Yanzi Presence | MDW3-0180 |
| Yanzi Presence Mini | MDH3-1620 |
| Yanzi Motion+ | MDW3-0231 |
| Yanzi Comfort | SWAQ3-0372 |
| Yanzi Health | SWAR4-1730 |
| Yanzi IoT Mesh | IoT-U42 |
These devices comply with part 15 of the FCC Rules / Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
The information below relates to the following products
| Product name | Model no |
|---|---|
| Yanzi IoT Gateway Plus | DR2-8910 |
| Yanzi IoT Gateway 2 | DR3-314x |
| Yanzi IoT Mesh | IoT-U42 |
For your own safety, and in terms of the RF exposure requirements of the FCC, always observe these
precautions:
- Always maintain a minimum separation distance of 20 cm (7.8 inches) between yourself and the radiating
antenna.
- Do not co-locate the antenna with any other transmitting device.
Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une
distance de moin de 20 cm. Installer les antennes de facon Ă ce que le personnel ne puisse approcher Ă 20
cm ou moins de la position centrale de l’ antenne. La FCC des éltats-unis stipule que cet appareil doit être
en tout temps éloigné d’au moins 20 cm des personnes pendant son functionnement.
Yanzi IoT Gateway 2
The below information relates to Yanzi IoT Gateway 2, DR3-314x.
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE |  |
| United Kingdom | UKCA |  |
| US | FCC |  2AE7LDR3-314x |
| Canada | IC | 20363-DR3314x |
| Australia | RCM |  |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Japan | MIC |  018-180078 |
| Hong Kong |  |
|
| Singapore | iDA |  |
Yanzi Access Point 3
The below information relates to Yanzi Access Point 3, AP3-1001
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE | |
| United Kingdom | UKCA | |
| US | FCC | Contains FCC ID 2AE7LVAI1-0004 |
| Canada | IC | 20363-VAI10004 |
| Australia | RCM | |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Singapore | iDA | |
Yanzi IoT Mesh
The below information relates to Yanzi IoT Mesh, IoT-U42.
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE | |
| United Kingdom | UKCA | |
| US | FCC | 2AE7LIOT-U42 |
| Canada | IC | 20363-IOTU42 |
| Australia | RCM | |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Japan | MIC | 018-180051 |
| Hong Kong |  |
|
| Singapore | iDA | |
Yanzi Comfort
The below information relates to Yanzi Comfort, SWAQ3-0372
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE | |
| United Kingdom | UKCA | |
| US | FCC | 2AE7LSWAQ3-0372 |
| Canada | IC | 20363-SWAQ30372 |
| Australia | RCM | |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Japan | MIC | 018-180052 |
| Hong Kong |  |
|
| Singapore | iDA | |
Yanzi Health
The below information relates to Yanzi Health, SWAR4-1730
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE | |
| United Kingdom | UKCA | |
| US | FCC | Contains FCC ID 2AE7LVAI1-0004 |
| Canada | IC | 20363-VAI10004 |
| Australia | RCM | |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Singapore | iDA | |
Yanzi Motion+
The below information relates to Yanzi Motion+, MDW3-0231.
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE | |
| United Kingdom | UKCA | |
| US | FCC | 2AE7LMDW3-0231 |
| Canada | IC | 20363-MDW30231 |
| Australia | RCM | |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Japan | MIC | 018-180053 |
| Hong Kong |  |
|
| Singapore | iDA | |
Yanzi Presence Mini
The below information relates to Yanzi Presence Mini, MDH3-1620.
| Country/Region | Standard | Regulatory Informatioon |
|---|---|---|
| Europe | CE, RED, RoHS, WEEE | |
| United Kingdom | UKCA | |
| US | FCC | 2AE7LMDH3-1620 |
| Canada | IC | 20363-MDH31620 |
| Australia | RCM | |
| New Zeeland | R-NZ | R-NZ conformity A1 |
| India | WPC | |
| China | SRRC | |
| Japan | MIC | 018-180050 |
| Hong Kong |  |
|
| Singapore | iDA | |
Yanzi Gateway L
The Yanzi Gateway L is an off-the-shelf computer, Dell Optiplex 30x0, with Yanzi Gateway software running. The declaration of conformity from Dell specifies the following certificates:
IECEE/CB, CE/EMC, FCC Part 15, IC/ICES, ACMA/RCM, VCCI, CSA, UL, REACH, RoHS, BSMI, CCC, NOM, NYCE, KC, EAC, TUV, and WEEE.
For Singapore, a declaration of exemption from Dell specifies that product is out of scope of SPRING certification.
For Hong Kong, there is no specific requirement for the product.
Yanzi Gateway XL
The Yanzi Gateway XL is an off-the-shelf computer, Supermicro SYS-5019S-L, with Yanzi Gateway software running. The declaration of conformity from Supermicro specifies the following certificates:
IECEE/CB, CE/EMC, FCC Part 15, IC/ICES, ACMA, VCCI, CSA, UL, REACH, RoHS
For Singapore, product is out of scope of certification as it does not fall under the Consumer Protection (Safety Requirements) Regulations (CPSR).
For Hong Kong, there is no specific requirement for the product.